PIONEER ND-BT1/E5
Manual de Servicio

5

6

7

8

4. Procedure for checking
Display Operation Method
A

ND-BT1/E5 will be connected to the connectable product, and start. Select [Menu] [Settings] [Hardware] [Conection Status].

Make sure on the left screen that the items under Phone Connection Status are indicating [OK]. In this case, because registration of the BT telephone has not been completed, level indication of the antenna bar is not displayed even though the status is indicated as OK. * In the case of NOK, possible case is poor connection between ND-BT1/E5 and navigation product or failure of the wired section of ND-BT1/E5.

B

Select [Menu] [Info/Phone] [Registration] [Mobile].

[Phone Menu]

[Phone Settings]

Search for the Bluetooth device and enter the passkey by operating the mobile telephone. * In case the device name is not displayed in Bluetooth device search, the possible cause is the failure of the wireless section of ND-BT1/E5.

C

When the connection with the BT telephone is completed, the screen as shown on the left will be displayed. Antenna bar will be displayed on the [Conection Status] screen. When the connection is successfully established, conduct speech test and check the voice transmission and reception.

D

E

F

ND-BT1/E5
5 6

7

8

19