2 Turn the feed hose clockwise slightly to remove pawls, and remove the feed hose. 3 Open the inner lid, and remove the air supply hose by removing pawls of the air supply hose. 4 Slide the body B frontward after pulling up rear portion of the body B slightly. (Front portion of the Body B shall be holded.) 5 Set the body B against wall.
6 Remove 8 screws and 1 pawl mounting the outer tub cover to remove.
7 Remove the flapper. * Do not remove mounting screw completely, hold the screw of the flapper and pulling out. * Incase to pull out the flapper from the tub, Remove 2 detergent inlet (Blue pocket) from the tub, so that the flapper shall be throughed at groove on the balancer.
