SONY MZR909
Manual de Servicio

MZ-R909

128. Adjust with the [VOL+] key (adjusted value up) or [VOL--] key (adjusted value down) so that the adjusted value becomes E0.
Remote commander LCD display

142. Press the [VOL+] key twice to change the blinking portion to 103E.
Remote commander LCD display

023 103E00
00: Adjusted value

023 1039E0
E0: Adjusted value

129. Press the X key. (1039 is blinking) 130. Press the [VOL+] key once to change the blinking portion to 103A.
Remote commander LCD display

143. Press the x key. (00 is blinking) 144. Adjust with the [VOL+] key (adjusted value up) or [VOL--] key (adjusted value down) so that the adjusted value becomes A0.
Remote commander LCD display

023 103A00
00: Adjusted value

023 103EA0
A0: Adjusted value

131. Press the x key. (00 is blinking) 132. Adjust with the [VOL+] key (adjusted value up) or [VOL--] key (adjusted value down) so that the adjusted value becomes 8E.
Remote commander LCD display

145. Press the X key. (103E is blinking) 146. Press the [VOL+] key once to change the blinking portion to 103F.
Remote commander LCD display

023 103A8E
8E: Adjusted value

023 103F00
00: Adjusted value

133. Press the X key. (103A is blinking) 134. Press the [VOL+] key once to change the blinking portion to 103B.
Remote commander LCD display

147. Press the x key. (00 is blinking) 148. Adjust with the [VOL+] key (adjusted value up) or [VOL--] key (adjusted value down) so that the adjusted value becomes E1.
Remote commander LCD display

023 103B00
00: Adjusted value

023 103FE1
E1: Adjusted value

135. Press the x key. (00 is blinking) 136. Adjust with the [VOL+] key (adjusted value up) or [VOL--] key (adjusted value down) so that the adjusted value becomes 12.
Remote commander LCD display

149. Press the X key. (103F is blinking) 150. Press the [VOL+] key once to change the blinking portion to 1040.
Remote commander LCD display
00: Adjusted value

023 103B12
12: Adjusted value

023 104000

137. Press the X key. (103B is blinking) 138. Press the [VOL+] key once to change the blinking portion to 103C.
Remote commander LCD display

151. Press the x key. (00 is blinking) 152. Adjust with the [VOL+] key (adjusted value up) or [VOL--] key (adjusted value down) so that the adjusted value becomes 0E.
Remote commander LCD display

023 103C00
00: Adjusted value

023 10400E
0E: Adjusted value

139. Press the x key. (00 is blinking) 140. Adjust with the [VOL+] key (adjusted value up) or [VOL--] key (adjusted value down) so that the adjusted value becomes 07.
Remote commander LCD display

153. Press the X key. (1040 is blinking) 154. Press the [VOL+] key once to change the blinking portion to 1041.
Remote commander LCD display

023 104100
00: Adjusted value

023 103C07
07: Adjusted value

141. Press the X key. (103C is blinking)

155. Press the x key. (00 is blinking)

28