SONY MZ-R900PC
Manual de Usuario

MZ-R900

8. Press the x key. (00 is blinking) 9. Adjust with the [VOL+] key (adjusted value up) or [VOL--] key (adjusted value down) so that the adjusted value becomes AA.
Remote commander LCD display

23. Press the [VOL+] key once to change the blinking portion to 0D65.
Remote commander LCD display

023 0D6500
00:Adjusted value

023 0D5DAA
AA:Adjusted value

10. Press the X key. (0D5D is blinking) 11. Press the [VOL+] key once to change the blinking portion to 0D5E.
Remote commander LCD display

24. Press the x key. (00 is blinking) 25. Adjust with the [VOL+] key (adjusted value up) or [VOL--] key (adjusted value down) so that the adjusted value becomes 1C.
Remote commander LCD display

023 0D651C
1C:Adjusted value

023 0D5E00
00:Adjusted value

12. Press the x key. (00 is blinking) 13. Adjust with the [VOL+] key (adjusted value up) or [VOL--] key (adjusted value down) so that the adjusted value becomes 04.
Remote commander LCD display

26. Press the X key. (0D65 is blinking) 27. Press the [VOL+] key once to change the blinking portion to 0D66.
Remote commander LCD display

023 0D6600
00:Adjusted value

023 0D5E04
04:Adjusted value

28. Press the x key. (00 is blinking) 29. Adjust with the [VOL+] key (adjusted value up) or [VOL--] key (adjusted value down) so that the adjusted value becomes 03.
Remote commander LCD display

14. Press the X key. (0D5E is blinking) 15. Press the [VOL+] key to change the blinking portion to 0D61.
Remote commander LCD display

023 0D6100
00:Adjusted value

03:Adjusted value

023 0D6603

16. Press the x key. (00 is blinking) 17. Adjust with the [VOL+] key (adjusted value up) or [VOL--] key (adjusted value down) so that the adjusted value becomes 20.
Remote commander LCD display

30. Press the X key. (0D66 is blinking) 31. Press the [VOL+] key to change the blinking portion to 0D68.
Remote commander LCD display

023 0D6800
00:Adjusted value

023 0D6120
20:Adjusted value

18. Press the X key. (0D61 is blinking) 19. Press the [VOL+] key to change the blinking portion to 0D64.
Remote commander LCD display

32. Press the x key. (00 is blinking) [VOL+] key (adjusted value up) or [VOL--] 33. Adjust with the key (adjusted value down) so that the adjusted value becomes 80.
Remote commander LCD display

023 0D6400
00:Adjusted value

80:Adjusted value

023 0D6880

20. Press the x key. (00 is blinking) 21. Adjust with the [VOL+] key (adjusted value up) or [VOL--] key (adjusted value down) so that the adjusted value becomes F4.
Remote commander LCD display

34. Press the X key. (0D68 is blinking) 35. Press the [VOL+] key once to change the blinking portion to 0D69.
Remote commander LCD display

023 0D6900
00:Adjusted value

023 0D64F4
F4:Adjusted value

36. Press the x key. (00 is blinking)

22. Press the X key. (0D64 is blinking)

24