� Prior to performing the following procedures, remove the CD changer mechanism assembly. (See "3.1.2 Removing the CD changer mechanism assembly".) 3.2.1 Removing the tray disc (See Figs.1 and 2) (1) Turn the gear cam on the bottom side of the CD changer mechanism assembly in the direction of the arrow and draw the tray disc toward the front until it stops. (See Figs.1 and 2.) (2) Disconnect the card wire from the connector CW103 on the CD sub board. (See Figs.1 and 2.) (3) Push down the two tray stoppers and pull out the tray disc. (See Fig.2.)
