SONY MXDD4
Manual de Usuario

Editing Recorded MDs

5

Press AMS or YES. A flashing cursor appears in the display. The deck starts playing and you can name a track while monitoring the sound.

9

Repeat steps 7 and 8 until you have entered the entire title.

If you entered the wrong character
Press 0 or ) until the character to be corrected starts flashing, and repeat steps 7 and 8 to enter the correct character.

To erase a character

6

Press TIME/CHAR to select the character type as follows: To select
Uppercase letters Lowercase letters Numbers Symbols

Press 0 or ) until the character to be erased starts flashing, then press CLEAR.

Press TIME/CHAR repeatedly until
�A� appears in the display �a� appears in the display �0� appears in the display � � � appears in the display

To enter a space*
Press AMS while the cursor is flashing. To enter a space after the title, press AMS or ).
* You cannot select a space for the first character of the title.

10 Press YES.
To cancel labeling
Press MENU/NO or p. Notes

7

Turn AMS to select the character. The selected character flashes. Letters, numbers, symbols, and a space appear in sequential order as you turn AMS. You can use the following symbols in titles: ��/,.():!?&+<> _=�;#$%@ `

� You cannot label an MD during recording. � You cannot label a track or an MD while you are recording over an existing track.

You can press TIME/CHAR to change the character type at any time during step 7 (see step 6 above).

8

Press AMS to enter the selected character. The selected character stops flashing and the cursor flashes waiting for the input of the next character.

34