JVC MX-D602TJ
Manual de Usuario

Sound Modes
The System has some preset sound effects that give you control of the way your music sounds, so you can tailor it for your room and for the quality of the source. We can give you some idea of how each one affects the music, but the only way to really tell is to try them yourself. You can also create up to three of your own customized S.E.A. (Sound Effect Amplifier) settings and store them in the Unit�s memory (MANUAL 1, MANUAL 2, MANUAL 3). The preset sound modes include modes using surround effects and modes using S.E.A. effects. Sound Mode effects cannot be recorded.
SOUND MODE

To get an effect, press SOUND MODE repeatedly until the Sound Mode you want appears on the display. The Sound Mode selected will appear on the display for three seconds. When a surround effect mode is selected, the frame around the SOUND MODE indicator will light up. When a S.E.A. effect mode is selected, the SOUND MODE indicator will light up. Each time you press SOUND MODE, the Sound Mode changes as follows: = D. CLUB = HALL = STADIUM = ROCK = POP = CLASSIC = MANUAL 1 = MANUAL 2 = MANUAL 3 = OFF = (back to the beginning)

or

Surround effect modes
D. CLUB (Dance Club) HALL STADIUM Increases resonance and bass. Adds depth and brilliance to the sound, like in a concert hall. Adds clarity and spreads the sound, like in an outdoor stadium.

S.E.A. effect modes
ROCK POP CLASSIC Boosts low and high frequencies. Good for vocal music. Set for wide and dynamic sound stereo systems.

To cancel an effect, press SOUND MODE until �OFF� appears on the display. The SOUND MODE indicator goes out. To recall the previous Sound Mode, press SOUND MODE once.

Customizing a Sound Mode ����������������
You can change an existing sound mode to suit your own preferences. These changed settings can be stored in the Unit�s sound mode memory.

1. Select the Sound Mode you want to change.
If you select D. CLUB, HALL, or STADIUM, the surround effect remains unchanged, but you can adjust the S.E.A. effect.

2. Press SEA CONTROL.
The low tone section of the tone equalizer flashes. Once �SEA CONT� appears, the low tone levels will appear. Flashing

\
Note: If no adjustments are made for 10 seconds after SEA CONTROL is pressed, Sound Mode will appear on the display then revert to the previous display.

11