Tuner Operations
Changing tuning grid
(not available for all versions)
Other Functions
The sleep timer enables the system to switch to standby mode automatically at a preset time. q Press SLEEP repeatedly until it reaches the desired preset turn-off time. � The selections are as follows (time in minutes): 15 � 30 � 45 � 60 � 90 � 120 � OFF � 15 � � �SLEEP� icon will show on the display, except if "OFF" is selected.
In some countries, the frequency step between adjacent channels in the MW band is 9 kHz (10 kHz in some areas). The preset frequency step in the factory is 9 kHz. IMPORTANT! Changing the tuning grid will erase all previously stored preset radio stations. q Press and hold down PLAY/PAUSE �� button on front panel for more than five seconds. � The display will show "GRID 9" or "GRID 10". Helpful Hints: � GRID 9 and GRID 10 indicate that the tuning grid is in step of 9 kHz and 10 kHz respectively. � The FM tuning grid also will be changed from 50 kHz to 100 kHz or vice versa.
To check or change the setting q Press SLEEP once to show the remaining time before switching off. If you continue pressing the SLEEP button, the next Sleep Timer option will appear. To cancel the sleep timer q Press SLEEP repeatedly until "OFF" appears or press the STANDBY ON button.
