ROLAND MV-8000 V35
Manual de Usuario

Automating mixing operations (Automation)

Editing the recorded mute data
In the MUTE CONTROL TRACK screen, you can edit the mute data that is recorded on the Mute Control Track. You can adjust the timing (measure-beat-tick) of the recorded mute data, or change the mute on/off status.
You can access the MUTE CONTROL TRACK screen

1.

Hold down

, and press

.

from the SEQUENCE (or PATTERN) screen. To access this screen, press [MENU], select �Mute Control Track�, then press [F5 (Select)].

The TRACK MUTE screen will appear.

2.

Press

.

3.

Use

to select �Mute Control Track� and press

(Select).

The MUTE CONTROL TRACK screen will appear.

F button

Explanation. Adds a new Mute data to the current location. Erases the Mute data at the cursor location. The erased data will be held in the temporary memory. Copies the Mute data at the cursor location into the temporary memory. The PASTE EVENT popup will appear. Adds the Mute data held in the temporary memory to the specified time. The TRACK SELECT screen (p. 9) will appear.

(Create)

(Erase) (Copy)

(Paste)

(Track Sel)

4.

Use

or VALUE dial to select the mute data which you want to edit.

5.

Use

to select the parameter which you want to change.

To specify the value of a parameter, you can use the VALUE dial or [DEC]/[INC], or use the numeric keys to

6.

Use VALUE dial or

/

to change the value.

input the value directly. After using the numeric keys to input a value, press [ENTER] to finalize the input.

8