DISASSEMBLY INSTRUCTIONS
2-16: CAPSTAN DD UNIT (Refer to Fig. 2-16) 1. Remove the Capstan Belt. 2. Remove the 3 screws 1. 3. Remove the Capstan DD Unit.
Spring Position
Fig. 2-13-B
Capstan Belt Capstan DD Unit
2-14: FE HEAD (RECORDER ONLY) (Refer to Fig. 2-14) 1. Remove the screw 1. 2. Remove the FE Head.
1
FE Head
1 1
� Screw Torque: 5 ± 0.5kgf�cm
1
Fig. 2-16
� The FE Head is not installed on the Video Cassette Player. � Screw Torque: 4 ± 0.5kgf�cm
2-17: MIDDLE GEAR/MAIN CAM (Refer to Fig. 2-17-A) Fig. 2-14 1. Remove the Polyslider Washer 1, then remove the Middle Gear. 2. Remove the E-Ring, then remove the Main Cam, P5 Cam, Pinch Roller Cam and Joint Gear.
1
Middle Gear E-Ring Main Cam
2-15: AHC ASS'Y/CYLINDER UNIT ASS'Y (Refer to Fig. 2-15) 1. Unlock the support 1 and remove the AHC Ass'y. 2. Remove the 3 screws 2. 3. Remove the Cylinder Unit Ass'y. NOTE When you install the Cylinder Unit Ass'y, tighten the screws from (1) to (3) in order while pulling the Ass'y toward the left front direction.
Pinch Roller Cam Joint Gear P5 Cam
AHC Ass'y
Cylinder Unit Ass'y
1
Fig. 2-17-A NOTE When you install the Pinch Roller Cam, P5 Cam and Main Cam, align each marker. (Refer to Fig. 2-17-B)
Pinch Roller Cam
