WHIRLPOOL MSD2757AEW
Manual de Usuario

Interior
Shelves
Tempered

Features ....................................................
Shelves Elevator
TM

Glass Cantilever

Shelf (select models)
TM

These shelves are adjustable so the refiigerator interior can be customized for varying food storage needs,

The Elevator shelf is equipped with a spill-retaining edge and the Easy Glide slide-out feature. It can be adjusted up or down without unloading. To slide out, grasp the front of the shelf and pull forward. Push the shelf in to return to original position. To adjust the ElevatoF" shelf: Unfold the recessed crank handle so it is at a right angle to the shelf front. Crank to the right (clockwise) to raise the shelf, or to the left (counterclockwise) to lower the shelf. To remove: Unload the shelf. Grasp the shelf front and pull completely forward. Press up on the stops (both

To remove a shelf: Unload. Lift up the rear of the shelf slightly, pull the shelf straight out. To move a shelf to a different position: After removing, tilt up the front edge of the shelf. Insert the hooks into the desired openings and let the shelf settle into place. Be sure the shelf is securely locked at the rear. Spill-Catcher
TM

the frame. continue pulling the shelf forward, clear of sides) and To replace: Align the shelf to the frame and push it all the way back. reinstallation. It is not necessary to depress the stops for In ordinary use, the Elevator'" shelf frame assembly does NOT require removal. Though unlikely, and not recommended, the correct removal procedure is as follows: � Unload the shelf completely. � Slide the shelf forward about two inches and manually move the two rear latches toward the shelf center. � While supporting the entire shelf and frame from underneath, lift slightly and rotate the assembly approximately 30 ° to allow the rear mechanism to clear the vertical rear side rails. � The entire assembly can then be moved forward and

Shelves

(select models)

Spill-Catcher '_'shelves have a spill retainer edge to contain spills and make clean-up easier, Some Spill-Catcher '_'shelves, feature the Easy Glide slide-out feature. To slide out, grasp the front of the shelf and pull forward. Push the shelf in to return to original position,

a shelf that is loaded with food (except the Elevator shelf - see above), ,_ WARNING m Never attempt to adjust

� To reinstall, reverse the removal procedure. Be sure the shelf is in a level position. When the sliding clear of the refrigerator compartment. shelf is pushed to the rear, it will reposition the rear latches to their correct operating position.

4