PHILIPS MRD300/37
Manual de Usuario

Changing the speakers� sound level
You can change the speakers� sound distribution to suit your surround sound needs. For example, if you are close to the left front speaker than the right front speaker, the left front speaker might seem �louder� than the right one. To adjust it, you must change the channel level for one or both speakers until the sound evens out.

System Setup (DVD)
The system setup is carried out via the TV, it enabling you to customize the DVD system to suit your particular requirement. If the preferred options selected are not available on a disc, then the discs own preference will be used. IMPORTANT ! � To access the System Setup menu, playback must be stopped. � Some operations may be different or restricted, depending on the disc format. Refer to the jacket or case of the disc you are playing.

English
14

1 Press DVD to switch on to DVD mode. 2 Press SELECT to select a speaker (front left, center, front
right, surround right, surround left or subwoofer.)

3 Adjust VOLUME (or press VOL +- on the remote
control) to change the channel level. FL, CNT, FR, SR, SL or Subwoofer: -15 to +10,

4 Repeat steps 2-3 for other setting.

Selecting the color system that matches the connected TV
DVDs are recorded according to a color system, the most common of which are NTSC and PAL. NTSC is the most common in the United States. In order for a DVD to play on this DVD system, the color system of the DVD, the TV and the DVD system should match.

Activating/Deactivating progressive scan mode
The progressive-scan display presents 60 complete frames per second, rather than the 30 frames per second of interlaced scanning (ordinary normal TV system.) With nearly double the numbers of line, progressive scan offers higher picture resolution and eliminates bothersome motion artifacts those jagged edges on moving objects. To enjoy the full quality potential offered by progressive scan feature, a progressive scan TV is required.

1 Press SETUP. 2 Press 4 to select
�PREFERENCES,� then press OK.

SETUP MENU - - MAIN PAGE
GENERAL SETUP SPEAKER SETUP AUDIO SETUP PREFERENCES EXIT SETUP

- - PREFERENCES PAGE - MULTI PAL NTSC

3 Select �TV TYPE,� then
press 2.

TV TYPE AUDIO SUBTITLE
GOTO PREFERENCES PAGE DISC MENU

1 Press DVD to switch on to DVD mode. 2 Press and hold DVD (PROGRESSIVE SCAN) again for
more than two seconds to switch on/off progressive scan mode. � �P-SCAN� icon will appear on the display panel if progressive scan mode is active. Helpful Hints: � The progressive scan video quality is only possible through Pr/Cr Pb/Cb Y video output connection. � Ensure that you have changed the type of video output setting to �PR PB Y� in the system setup menu (see next page).

4 Use 34 keys to select
your preference and press OK to confirm.

PARENTAL

PASSWORD DEFAULTS MAIN PAGE
TV TYPE SETUP

5 To close the menu, press
SETUP again.

MULTI � If the connected TV is compatible with both NTSC and PAL (multi-system,) select this mode. The output format will be in accordance with the video signal of the disc. NTSC � If the connected TV is NTSC system, select this mode. It will change the video signal of a PAL disc and output in NTSC format. PAL � If the connected TV is PAL system, select this mode. It will change the video signal of an NTSC disc and output in PAL format.

PREPARATIONS