Inicio >>
PIONEER >>
MMD-V700/Z/TA/HK5 Manual de Servicio
0 artículo(s) en Su carrito
Opiniones de los clientes
No hay comentarios de productos.
TEXT_PDF_SNIPPET
MCO-V700, MMD-V700
1 Notes on Changing the Hard Disk Unit
Never attempt to open the door while the lamp which is seen at the bottom of the hole on the bottom right is lit in red. Perform operation following the " Replacement procedure " below. Precision parts are mounted inside the unit. GRIP Be careful not to touch the internal parts. Do not apply shock to the unit. LAMP Be sure to observe the above caution to prevent damaging the unit.
SW1
SW2
01
81 8 SETTING SWITCH
MODE SELECT AUX ON OFF
DATA COPY TERMINAL
MAINTENANCE CONSOLE TERMINAL
EACH SONG RESET CHOREOKEY BGV GRAPHY CONTROLLER
BGM
WARNING
HDD
ON
OFF
ON
OFF
SELECT
SELECT
BACKGROUND IMAGE INTERNAL TEMP
REMOTE CONTROL UNIT SENSOR
ON
OFF
KARAOKE
PERFORMANCE MODE
TEMPO CHANGE
VOLUME
When performing Karaoke, set the KARAOKE SWITCH on both the rear and front panel to ON.
- EACH SONG RESET switch (Selects whether the song will be reset or not reset for KEY CONTROLLER and TEMPO CHANGE.)
This switch sets whether the unit will reset after each song (return to the initial preset values) or not reset.
= VOLUME ADJUSTMENT buttons
÷ VOLUME button When adjusting the volume, first, use this button to select the source you want to adjust (KARAOKE, BGM, LD IN, or AUX/ LD2), and adjust the volume with the VOLUME adjustment buttons. The volume can be adjusted when the selected source is producing music. Also you can use the Karaoke song to check the volume level of the BGM. ÷ � (MINUS) / +(PLUS) buttons Push to adjust the volume of the source selected by the VOLUME button.
