SONY MHC-ZX70DVD
Manual de Usuario

Setting for the surround sound (continued)
VES (Virtual Enhanced Surround) A
Uses 3D sound imaging to create virtual rear speakers from the sound of the front speakers (L, R) without using actual rear speakers. The virtual speakers are reproduced as shown in the illustration below.
Front speaker (L)
L

Notes
� Some discs do not have rear sound. In this case, you cannot get the 3D surround effect. � When you select an item, the sound cuts off for a moment. � When the playing signal does not contain the surround component, the effects may be difficult to hear even if you select �VES A� or �VES B�. � The sound does not come from the rear speakers when you set �VIRTUAL 3D SURROUND� to �VES A� or �VES B� in the Control Menu display even if you have connected rear speakers. � Set the front speakers to form an equilateral triangle including the listening position, or the effects may be difficult to hear even if you select �VES A� or �VES B�. � In case that the player outputs the signal from DIGITAL OUT OPTICAL, the surround effect will be heard only when you set �DOLBY DIGITAL� to �D-PCM�. � When you play a sound track with a 96 kHz sampling frequency, be sure to select �OFF�, or the output signals will be converted to 48 kHz (sampling frequency). (Except when the player outputs the audio signal from DIGITAL OUT OPTICAL.) � When you connect a center speaker and a subwoofer, you can also hear the sound from the center speaker and the subwoofer. When you select �VES A� or �VES B,� the player does not output the sound from the center speaker. � When you select monaural sound (1/L or 2/R) while playing CD or VIDEO CD, �VIRTUAL 3D SURROUND� mode switched off.

Front speaker (R)
R

VES (Virtual Enhanced Surround) B
Uses 3D sound imaging to create virtual rear speakers from the sound of the front speakers (L, R) without using actual rear speakers. The virtual speakers are reproduced as shown in the illustration below.
Front speaker (L) Front speaker (R)

38