* Pressing "SCR" key in the main unit in each status switches to "TEST STOP" . * Pressing "F "key in the main unit in each status where a setting value is displayed changes the digit of the setting value that will be changed. � When the setting value has two digits. The first digit (Initial value)
*** --
"F" key in the main unit "F" key in the main unit
The second digit
*** --
� When the setting value has three digits. The first digit (Initial value)
*** ___
"F" key in the main unit
The second digit
*** ___
"F" key in the main unit
The third digit
*** ___
"F" key in the main unit * Pressing VOL UP/DOWN key in each status where a setting value is displayed changes the value in the digit you selected in the range from 0H through FH. However, the setting value of RF side gain changes in the range from 0H through 6H.