SONY MDXC5970
Manual de Usuario

Memorizing only the desired stations
You can preset up to 20 FM stations (10 each for FM1 and 2), up to 10 AM stations in the order of your choice.

If you cannot tune in a preset station
Push and release the SEEK/AMS control up or down to search for the station (automatic tuning). Scanning stops when the unit receives a station. Push the SEEK/AMS control up or down repeatedly until the desired station is received.
Note If the automatic tuning stops too frequently, press (SHIFT), then press (3) (PLAY MODE) repeatedly until �Local� (local seek mode) is displayed. Then press (4) (n) to select �Local on�. Press (SHIFT). Only the stations with relatively strong signals will be tuned in. Tip If you know the frequency of the station you want to listen to, push the SEEK/AMS control up or down and hold until the desired frequency appears (manual tuning).

1 2 3 4

Press (SOURCE) repeatedly to select the tuner. Press (MODE) repeatedly to select the band. Push the SEEK/AMS control up or down to tune in the station you want to store on the number button. Press and hold the desired number button ((1) to (10)) until �MEM� appears. The number button indication appears in the display.

If FM stereo reception is poor � Monaural Mode

Note If you try to store another station on the same number button, the previously stored station will be erased.

1

During radio reception, press (SHIFT), then press (3) (PLAY MODE) repeatedly until �Mono� appears. Press (4) (n) repeatedly until �Mono on� appears. The sound improves, but becomes monaural (�ST� disappears). Press (SHIFT).

2

Receiving the memorized stations
1 2 3
Press (SOURCE) repeatedly to select the tuner. Press (MODE) repeatedly to select the band. Press the number button ((1) to (10)) on which the desired station is stored.

3

To go back to the normal mode, select �Mono off� in step 2 above.

Changing the displayed items
Each time you press (DSPL), the item changes as follows:
Frequency � Clock

After you select the desired items, the display will automatically change to the Motion Display mode after a few seconds. In the Motion Display mode, all the above items are scrolled in the display one by one in order.
Tip The Motion Display mode can be turned off. (See �Changing the sound and display settings� on page 13.)

10