SONY MDSE58
Manual de Usuario

Recording on MDs

6

Synchro-Recording With a Sony CD Player
g

By connecting your recorder to a Sony CD player, you can easily dub CDs onto MDs using the CD synchro buttons on the remote. If your recorder is connected to a Sony CD player by a digital input cable, track numbers are automatically marked as on the original, regardless of whether �LevelSync ON� or �LevelSyncOFF� is selected. If your recorder is connected to a Sony CD player by audio connecting cords through LINE (ANALOG) IN, track numbers are automatically marked when you select �LevelSync ON� (see �Marking Track Numbers While Recording� on page 12). As the same remote controls both the CD player and the recorder, you may have trouble operating both units if they are far from each other. If you do, place the CD player close to this recorder.

Press START. The recorder starts recording and the CD player starts playback. The track number and elapsed recording time of the track appear in the display. If the CD player does not start playing
Some CD player models may not respond when you press START on the remote of the recorder. Press P on the remote of the CD player instead.

7

Press STOP to stop synchro-recording.

To pause recording
Press STANDBY or CD PLAYER P. To restart recording, press START or CD PLAYER P. A new track number is marked each time you pause recording.

You can use the remote of the CD player during synchro-recording
When you press p, the CD player stops and the recorder pauses for recording. When you press P, the CD player pauses and the recorder pauses for recording. To restart synchro-recording, press ·.

6

You can change CDs during synchro-recording
Carry out the following steps instead of Step 7 above. 1 Press p on the remote of the CD player. The recorder pauses for recording. STANDBY
· P
+ ) r

p

2 Change the CD. 3 Press · on the remote of the CD player. Synchro-recording restarts.

START STOP CD PLAYER P

= 0

P

=

+

You can also do synchro-recording with a Sony video CD player
Using the procedure for synchro-recording with a Sony CD player, you can do synchro-recording with a Sony video CD player also. To select the video CD player, press button number 2 while pressing down the POWER button before starting the procedure. To select the CD player again, press button number 1 while pressing down the POWER button. The recorder is factory set to CD player for synchrorecording.

1 2 3 4 5

Turn on the CD player and the mixer. Carry out Steps 2 to 5 in �Recording on an MD� on page 6 to prepare the recorder for recording. Insert a CD into the CD player. Select the playback mode (Shuffle Play, Program Play, etc.) on the CD player. Press STANDBY. The CD player pauses for playing and the recorder pauses for recording.

You can check the remaining recordable time on the MD
Press DISPLAY/CHAR (or DISPLAY) (see page 15).

14