PHILIPS MC-I250/21M
Manual de Usuario

Troubleshooting
GENERAL The system does not react when buttons are pressed. Sound cannot be heard or is of poor quality.

E n g l i s h
38

The left and right sound outputs are reversed. The remote control does not function properly.

� Remove the AC power plug for one minute. Then reconnect and switch on the system again. � Adjust the volume. � Disconnect the headphones. � Check that the speakers are connected correctly. � Check if the stripped speaker wire is clamped into the speaker terminal. � Make sure the MP3-CD was recorded within 32-256 kbps bit rate with sampling frequencies at 16 kHz, 22,05 kHz, 24 kHz, 32 kHz, 44,1 kHz or 48 kHz. � Check the speaker connections and location. � Select the source (CD or TUNER, for example) before pressing the function button (�,í,ë). � Reduce the distance between the remote control and the system. � Insert the batteries with their polarities (+/- signs) aligned as indicated. � Replace the batteries. � Point the remote control directly toward the IR sensor on the front of the system. � Set the clock correctly. � Press TIMER ON /OFF to switch on the timer. � Press DIM to select DIM OFF display mode. � Power has been interrupted or the power cord has been disconnected. Reset the clock/timer.

The timer is not working. Not all buttons are lit. The Clock/ Timer setting is erased.

Visit our website �http://My.Philips.com� for online help.