Getting Started
6 7
English
Press 1 2 repeatedly to select "Video Setup Page". Select "TV MODE" to "P-SCAN", then OK to confirm. � The instruction menu appears on the TV.
1
Turn off your TV progressive scan mode or turn on to interlaced mode (refer to your TV user manual). Press SYSTEM on the remote to exit the system menu and then DISC to exit progressive scan. � The DVD blue background screen will appear on the TV. Note: � During normal playback in the progressive scan mode, pressing DISC button will exit the progressive scan mode.
2
1. ENSURE TV HAS P-SCAN. 2. CONNECT YPRPB CABLE. 3. IF TV ABNORMAL: WAIT 15 SEC RECOVERY.
8
Press 1 2 to highlight OK in the menu and press OK to confirm. There will be a distorted picture on your TV at this state until you turn on the progressive scan mode on your TV. Turn on your TV progressive scan mode (refer to your TV user manual). � The below menu appears on the TV.
9
CONFIRM TO USE P-SCAN, IF PICTURE IS GOOD, PRESS OK BUTTON ON REMOTE. TIME LAST 01 SECOND
0
Press 1 2 to highlight OK in the menu and press OK to confirm. � The setup is complete now and you can start enjoying the high quality picture. To deactivate Progressive manually
� When the distorted sign still appears on
the TV, it may be due to the connected TV does not accept progressive signals, and progressive is set by mistake. You must reset the unit to interlace format.
