1. If Fuse of the main switch is damaged, cut off the lead wire, which connect the Fuse to the cord wire (Black/Brown) and lead wire connected at the Main Switch. Replace the Fuse and connect to the Cord wire and Main Switch using a closed end connector. (Fig.4)
Fig.4
3.5.
BLOWER OUTLET UNIT
1. Remove the Blower Outlet Unit by pulling the spring which is located at the Body cover, locking the Blower Outlet Assembly upwards. (Fig.5)
Fig.5
3.6.
POWER CORD
Removing 1. Cut off the lead wire (Black/Brown) and lead wire (White/Blown) to replace the Power Cord. (Fig.6)
