Clock/Timer
Setting the timer
G The system can be used as an alarm clock, whereby the CD or TUNER is switched on at a set time. The clock time needs to be set first before the timer can be used. G During setting, if no button is pressed within 90 seconds, the system will exit timer setting mode automatically.
STANDBY-ON
PROGRAM
ON OFF
TIMER CLOCK
RDS BAND
REPEAT
SHUFFLE
SOURCE SELECT
PLAY�PAUSE
STOP
1 2
PREV
NEXT
iR
In any mode, press TIMER ON�OFF for more than 2 seconds. Turn VOLUME clockwise (or press SELECT SOURCE) to select sound source. Press TIMER ON�OFF to confirm your desired mode. � The selected source CD or TUNER is shown. The clock digits for the hours flash. Turn VOLUME to set the hours: clockwise for hours up; anti-clockwise for hours down. Press TIMER ON�OFF again. � The clock digits for the minutes flash. Turn VOLUME to set the minutes: clockwise for minutes up; anti-clockwise for minutes down. Press TIMER ON�OFF to confirm the time. � The timer is now set and activated.
Setting the clock
There are two possible methods for setting the clock: manually or automatically by using RDS. Automatic clock setting (RDS versions only)
3
4 5 6 7
1 2
Tune to a RDS station (see Radio Reception). Press CLOCK for more than 2 seconds. � SEARCH RDS TIME is displayed for a maximum of 90 seconds; the time is then displayed. � NO RDS TIME is displayed if no time signal has been received and you will have to set the clock manually. Manual clock setting
Activating and deactivating TIMER
G In standby or during playback, press TIMER ON�OFF once. � Display shows TIMER if activated, and disappears if deactivated.
1 2 3 4 5
In standby, press CLOCK. � The clock digits for the hours flash. Turn VOLUME to set the hours: clockwise for hours up; anti-clockwise for hours down. Press CLOCK again. � The clock digits for the minutes flash. Turn VOLUME to set the minutes: clockwise for minutes up; anti-clockwise for minutes down. Press CLOCK to confirm the time.
