WHIRLPOOL LTG5243BN0
Manual de Usuario

If You Need Assistance Or Service
1. Before calling for assistance ...
Is the power cord plugged in? Is your water turned on?

m

Is exhaust duct or outside exhaust hood clogged with

Is lint screen clogged with

ml PROBLEM Washer will not fill Washer does not spin

Have you blown a fuse or tripped the circuit breaker?

If you need more help, check the chart below.

CHECK

THE FOLLOWING

Is the power cord firmly plugged into a live circuit with proper voltage? Has a household fuse blown or circuit breaker tripped? Has a time-delay fuse been used? Are both hot and cold water faucets open? Are the water supply hoses kinked? Is the Cycle Control Knob set and pulled out? Is the lid closed? Is the power cord firmly plugged into a live circuit with proper voltage? Has a household fuse blown or circuit breaker tripped? Has a timedelay fuse been used? Washer pauses briefly at different times in each cycle. These pauses are normal. Is the power cord firmly plugged into a live circuit with proper voltage? Has a household fuse blown or circuit breaker tripped? Has a time-delay fuse been used?

Washer stops during a cycle

Washer fills and drains without running Washer drains during wash and rinse cycles, or water siphons out

Is the Cycle Control Knob pointing to a number in the cycle? Adjust the drain hose so that it is higher than the water level in the washer.
contmuea on next page 33