Using the LockOut feature
The LockOut feature allows you to �lock out� others from using the washer. This feature is useful to lock the electronic controls if you have young children. LockOut disables the control panel while the LockOut light glows. NOTE: You can only select LockOut when your washer is not running and your control panel is off.
To select LockOut: 1. Press CANCEL
to turn the control panel off.
PRESS
Cancel
2. Press and hold OPTIONS SELECT/LOCKOUT
for 5 seconds. When the key is released, the light glows by LockOut.
PRESS AND HOLD
Status
Fill/Wash Rinse Final Spin LockOut
Select LockOut
To unlock control panel:
Repeat Steps 1 and 2 above.
Changing the end-of-cycle signal
The washer sounds a signal to let you know when a cycle is complete. The signal may be turned off. The signal is helpful when you are washing items that should be removed from the washer as soon as the cycle ends.
To turn the end-of-cycle signal OFF or ON:
� After your washer starts a cycle, push and hold ON/SELECT for five seconds.
