s Height adjustment, angle adjustment
Caution: � Pressure from hands on the LCD panel could cause damage. � Do not attempt to move the monitor beyond its movement range. Applying excessive force to move the monitor may damage the product. � Be careful not to allow your fingers to be pinched.
Height adjustment
Lowest position approx. 47mm Highest position
1
2
3
4
5
6
7
8 9 10 11
1 INPUT button 2 MENU button 3 c/MODE button
To switch between the signal's input terminals. This button is used to pop-up, select and close the OSD (On Screen Display) Menu. When the OSD Menu is displayed: This button is used to select menu options. When the OSD Menu is not displayed: This button is used to set DISPLAY MODE. When the OSD Menu is displayed: These buttons are used to select an option or adjust the value of the selected option. When the OSD Menu is not displayed: These buttons are used to adjust backlight brightness. Pressing this button turns the power on. This LED is lit green when in use and orange when in power-saving mode.
approx. 60
4 e d buttons
approx. 20
5 Power button 6 Power LED
� When positioning the display higher, hold the stand tight so that it does not move together with the display.
7 Main power switch 8 Power terminal 9 Analog RGB input terminal 1 and 2 F DVI-D input terminal The computer's digital RGB output terminal can be connected here. The separately-sold cable (NL-C01E) is necessary for connection. It can be connected to a computer with a DVIcompatible output terminal (DVI-D24 pin or DVII29 pin) and which has SXGA output ability. Depending on the computer to be connected, correct display may or may not be possible. By connecting a security lock (commercially available) to the security lock anchor, the monitor is fixed so that it cannot be transported. The security slot works in conjunction with Kensington Micro Saver Security Systems. Note: Never block the ventilation openings as this may lead to overheating inside the monitor and result in malfunction. The analog signal cable is connected here.
