|
|
|
Usuarios conectados
Actualmente hay 5445 visitantes online. |
|
Productos
|
|
Información
|
|
Destacado
|
|
|
 |
|
|
No hay comentarios de productos.
·Cautions to be taken when disassembling or reassembling the unit
WARNING
1. Prior to servicing, make sure to remove the power supply plug. (You could get an electrical shock accident.) 3. Before servicing, make sure you know the locations of high-voltage parts. (You could get an electrical shock accident.) 2. Use caution not to touch the inside of the product with a wet hand or foot. (You could get an electrical shock accident.) 4. Do not work on an unstable place or with the stand put upright. In particular, fix the cabinet before replacing PWBs or fan. (There is fear of your getting an injury due to tipping or falling.
CAUTION
1. When disassembling or reassembling the unit, make sure to put the front cabinet side (LCD unit side) downward and carry out work using caution not to get your fingers caught. (Since the LCD unit side is heavier, there is fear of your getting an injury due to tipping or falling.) 3. When disassembling the unit, use caution not to get a burn because radiating plates and areas around lamps on the PWB are hot immediately after unplugging. (You could get a burn.) 5. Pay attention to burrs or edges of the resin (cabinet and PWBs) and metal (chassis and others) parts. (You could cut your finger with them.) 2. Use caution to avoid a reaction due to your applying too much force when removing or reinstalling screws. (You could get an injury.)
4. Use caution not to get you fingers caught in the stand pole, between the stand and angles or under the cabinet. (You could get an injury.)
6. Use caution to the deformation of the grounding spring or the displacement of the ferrite core. (There is fear of causing radio noises to other equipment.)
·Cautions to be taken when replacing fluorescent lamp
CAUTION
1. Make sure the fluorescent lamp is cool enough not to get a burn before you are going to touch the lamp or areas around it. (You could get a burn.) 3. Use caution not to break the fluorescent lamp when handling it. (You could get an injury.) 2. Use caution to avoid a reaction due to your applying too much force when removing the connector. (You could get an injury.)
|
|
|
> |
|
