WHIRLPOOL LE7000XPW0
Manual de Usuario

Drying times

Mixed loads

Drying times will vary depending on: l amount of moisture in the clothes. l type and weight of the fabric. l we of the load. l room temperature around the dryer. l temperature of the wash rinse water. l amount of lint in the lint screen. l dryer temperature selection. See page 6 in your�Dryer Guide� for more information.

When drying a load with different kinds and weights of fabrics, use the cycle suggested for the lightest fabrics When the dryer stops, remove dry items and reset the control.

End-of-cycle signal
The dryer sounds a signal to let you know when the cycle is finished. The signal cannot be turned off and is not adjustable. The signal is helpful when you are drying permanent press, synthetics and other items that should be taken out as soon as the dryer stops.

End-of-cycle

signal

8

Clean lint screen before each load. If you neglect to clean your lint screen, the signal will sound. The (whistle tone) signal lets you know the air flow is being restricted. Restricted air flow reduces drying efficiency. Turn off the dryer and clean the lint screen as shown on page 9.