|
Usuarios conectados
Actualmente hay 5793 visitantes online.
|
Productos
|
Información
|
Destacado
|
|
|
|
|
No hay comentarios de productos.
Operating sequence
Important: Before washing your first load of laundry, we recommend that you run a cotton cycle at 60°C, with the machine empty, in order to remove any manufacturing residue from the drum and tub. Pour half a measure of detergent into the main wash compartment and start up the machine.
4 Select the drying time
Turn the selector knob clockwise to the required time.
5 Depress button ton .
and, if desired, but-
Automatic washing plus drying (NON-STOP operation)
This option is only possible for cottons and synthetics. Maximum load: � cotton, linen 2.25 kg � synthetics 1.5 kg
6 Select the temperature
Turn the selector knob to the required temperature setting.
90
Place the laundry in the drum
Open the door and place the laundry in the drum, one item at a time, shaking them out as much as possible. Close the door.
P1004
7 Select the programme and start it
B
B
P0004
2 Measure out the detergent
Pull out the dispenser drawer until it stops. Measure out the amount of detergent recommended by the manufacturer in a graduated cup and pour it into the main wash compartment .
P1002
Turn the programme selector knob clockwise to the required programme and pull it outwards: the operating light comes on and the machine starts to operate.
8 At the end of the programme
The machine stops automatically. It is normal to have to wait for about 2 minutes before being able to open the door to allow the safety lock to release. Depress the programme selector knob to switch the machine off, the operating pilot light goes out. Remove the laundry. Turn the drum by hand to make sure it is completely empty, so as to avoid any forgotten items being damaged in a subsequent wash (e.g. shrinking) or their colour running into a load of whites. Turn the water tap off and unplug the machine. Leave the door ajar to air the machine.
If you wish to carry out a prewash, pour detergent into the appropriate com.
partment marked
3 Measure out the additives
If required, pour fabric softener into the compartment marked and the bleaching agent into the compartment marked without exceeding the «MAX» mark.
P1003
29
ENGLISH
|
|
|
> |
|