Display and picture control/Audio control
Audio Control The projector�s sound is set to standard specifications at the factory. However, you can adjust the sound to suit your own preferences by using the AUDIO CONTROL feature. The following adjustments can be made: � � � � Volume � adjusts the sound level; Bass � adjusts the bass tones; Treble � adjusts the high tones; Mute � mutes the sound of the projector (or an externally connected loudspeaker).
Mirror The projector can be used in various positions with respect to the viewers and the projection screen. With the MIRROR function the picture can be displayed in a way that is suitable for a specific application. Rear screen projection The image can be flipped to a horizontal mirror image of the input signal for rear screen projection.
SCREEN
1. Select the required input (Data, Video or S-Video). 2. Press MENU.
� 3. 4. 5. The menu bar appears on the screen. Use Cursor Control to select AUDIO in the menu bar. Use Cursor Control to select the item to be adjusted. Use Cursor Control to make the required adjustment in the action window. 6. If required, select the next item to be adjusted or press MENU to exit.
Front projection
SCREEN
Notes: � The volume can also be adjusted with the � VOLUME + buttons on the projector or on the remote control. � When the projector is connected to an amplifier or stereo system, the volume must be adjusted on the amplifier or stereo system. Caution! Always reduce/check the volume setting of connected amplifiers before switching off (A/V) mute, to prevent damage to speakers.
Rear projection Ceiling-mount projection The projector is equipped with an upside-down scan function (vertical mirror), which allows the image to be flipped when the projector is mounted upside down to the ceiling.
SCREEN
Ceiling projection
1. � 2. 3. 4.
Press MENU. The menu bar appears on the screen. Use Cursor Control to select PICTURE in the menu bar. Use Cursor Control to select MIRROR from the sub menu. Use Cursor Control to select the correct setting for your application. This is the setting at which the letters �AB� are correctly projected ( ). 5. Press OK (�/� �) to confirm and store the selection. 6. If required, select another item you wish to adjust or press MENU to exit.
