SHARP LC-30HV4E
Manual de Servicio

LC-30HV4E
7. Remove the system/control terminal retaining: 7-1. Remove the four hex head screws securing the terminals of the system and control cables (white). 7-2. Remove the two screws securing the terminal of the system cable (gray). 7-3. Remove the two rear chassis retaining screws. 8. Remove the PC I/F and SR units: 8-1. Remove the four PC I/F top shield retaining screws and remove the shield. 8-2. Remove the six PC I/F unit retaining screws and remove the unit. 8-3. Remove the two PC I/F bottom shield retaining screws and remove the angle. 8-4. Remove the two SR unit retaining screws and remove the SR unit. 9. Remove the 8 rear cabinet retaining screws and remove the rear chassis. ( 9 : XBPSN30P06000, 9 : XEBSF30P08000) 10. Remove the three power supply board retaining screws and remove the power supply board.

8-1

8-2 PC I/F unit shield
Rear chassis 9-2

8-3 PC I/F unit

9-1

PC I/F unit angle

SR unit 8-4

7-1 7-2 7-3

10

Power unit

14