How to upgrade the software When you are done with the version upgrade, check the software version information in the adjustment process mode. 1 Turn off the power. Insert the PC card into the slot of the set, which was prepared in the above "Creating the PC card for version upgrade". 2 Turn on the power. 3 Wait until the process ends (about 2 minutes). Entering the card mode is not necessary. * In case the card mode is entered, nothing appears on the screen for about 50 seconds after power-on. "Card error" is displayed on the screen.
The action has ended successfully when the display is replaced by "Loading from the card".
* If the action has failed, turn off the power and repeat the steps 1 thru 3.
