DISASSEMBLY OF THE SET
1. Insert your finger into the center of the terminal cover and pull it toward you to detach the terminal cover. 2. Remove the four screws 1 and one screw 2. 3. Open the cabinet B by approx. 45� from the bottom of the cabinet (stand side). 4. Remove the lead wire from the cable clamp 3. 5. Remove the power connector 4. 6. Remove the connector 5 from the light reception unit. 7. Remove the lead wire from the cable clamp 6. 8. Remove the speaker connector 7. 9. Remove the FFC from the FFC connector 8 on the main PWB. 10. Remove the connector 9 from the switch PWB. 11. Remove the right and left speaker connectors 0 on the terminal PWB. <<Disassembly of the main PWB>> 1. Disconnect the flexible cable connectors q and w from the LCD panel. 2. Disconnect the cable connectors e and r from the fluorescent lamp. 3. Remove the four screws t. <<Disassembly of the terminal PWB>> 1. Remove the cover u. 2. Remove the five screws y. 3. Remove the two screws i. Take them out of the cabinet holes.
<<Cabinet A side>>
Cabinet A
CCABA2402CE02
<<Cabinet B side>> Terminal Cover GCOVA1858CEKA
Hinge Cover Rotation Cover
GCOVA1853CESA GCOVA1854CESA Cabinet B CCABB2288CE01
