2. Pull both hose holders off the unit with a strong pull.
3
The special key E and the caps D (2 each) and G (1 each) are supplied with it. 3. Unscrew the two screws with the special spanner. 4. Unscrew the 4 screws B with special spanner E. 5. Remove the transport rail C. 6. Screw the 4 screws B back in. 7. Close the 2 large holes with the caps D. Important! Press in the caps with sufficient strength so that they engage in the rear panel (protects the inside of the units against splash water). 8. Remove the screw F, including the compression spring, with the special spanner E. 9. Close the hole with the cap G. Important! Press in the cap with sufficient strength so that it engages in the rear panel (protects the inside of the unit against splash water).
