. SET LOAD SIZE . SET WATER TEMPERATURE . PUSH IN KNOB, TURN TO CYCLE AND TIME . PULL OUT TO START
st2ps add cle -
. SET LOAD SIZE l SET WATER TEMPERATURE l PUSH IN KNOB, TURN TO CYCLE AND TIME l PULL OUT TO START
I 1
MANENT agltotlon
DRAIN No
Agitation
For Rinsing Only
PRESS If your Lvant high and a lo\+speed spin
For Spinning
Only
Your washer can be set to rinse only Use the setting for on extra rinse. or for loundrv that only needs a rinse and spin There IS o dot just after the numbers In PERMANENT PRESS. REGULAR HEAVY and KNITS GENTLE If you push in on the Cycle Control Knob. turn the pointer to one of those dots and pull the Control Knob out, the washer will fill. agitate, drain and spin If you want high agitation and spin. use the dot In REGULAR HEAVY If you want low agitation and spin, use the dot In KNITS GENTLE Use the dot in PERU 10
To set the washer so it drains and spins water out of the load. push in on the Control Knob, turn the dial to the right (clockwise) so the pointer IS touching the bar just before OFF in any cycle The washer WI/I drain. splr out water and stop If you want a low-speed spin use the bar on PERMANENT PRESS or KNITS GENTLE All the other cycle settllgs have a high-speed spin