To stop the washer at any time, push in the Cycle Control Knob. To restart the washer, pull out the Cycle Control Knob. NOTE: Use warm water with the KNITS GENTLE Cycle. For heavily soiled permanent press or knit clothes, pre-wash or presoak before washing in warm water. 3. Select wash time and restart the washer l Stop on the number in the wash cycle you want. The numbers are minutes of wash time. The drawing shows 10 minutes of agitation in the REGULAR NORMAL Cycle. l Restart the washer by pulling out the Cycle Control Knob.
What happens in each cycle
Each cycle has different agitation and spin speeds designed for different kinds of fabrics. Numbers on the dial in each cycle are the minutes of wash agitation time. When the Cycle Control Knob is set to a number and pulled out, the washer fills before agitation and timing starts. After agitation starts, the knob turns clockwise until it points to OFF and the cycle ends. The washer will pause briefly throughout each cycle. These pauses are normal. They allow for the reversing of the motor and normal washer operation. NOTE: You may hear the sound of water spraying during the spin parts of some cycles. In all cycles, water is sprayed on the spinning load to help with the rinsing. Gentle Wash System For better fabric care in the REGULAR Cycles, the agitation speed is reduced during the last few minutes of wash agitation time.