PANASONIC KXTGA273S
Manual de Usuario

4

Using the Alarms

Section 4

The charger unit features an alarm clock. You can set the alarm to play the radio or to sound a buzzer at a set time. The radio alarm and the buzzer alarm can be set separately. [BUZZER, ALARM DISPLAY/SET] [-, TUNE/CLOCK] [RADIO, ALARM DISPLAY/SET] [+, TUNE/CLOCK] [SNOOZE/MUTE]

4-B Setting the Buzzer Alarm

1 Press and hold [BUZZER, ALARM
DISPLAY/SET] (the button on the top of the unit) until the time flashes.

2 Set the alarm time by pressing
[�, TUNE/CLOCK] or [+, TUNE/CLOCK]. � Pressing and holding [�] or [+] changes the time faster.

3 Press and release [BUZZER, ALARM DISPLAY/SET] to save
the buzzer alarm time. � The time stops flashing and returns to the current time. �� � is displayed while the buzzer alarm is turned on. � The buzzer will start at the set time and will automatically stop after 10 minutes. �You can exit alarm setting mode any time by pressing [OFF]. �If a power failure occurs, the buzzer alarm time will be retained for about 10 minutes.

[OFF] VOLUME [AM/FM, RADIO] Control Memory Buttons ([M1], [M2], [M3], [M4] and [M5])

4-A Setting the Radio Alarm

To confirm the buzzer alarm time: Press and release [BUZZER, ALARM DISPLAY/SET]. �The alarm time will be displayed for about 3 seconds.

1 Press [AM/FM, RADIO] to turn the radio on. 2 Press [AM/FM, RADIO] to switch between AM and FM. 3 Tune in to the desired station by pressing [�, TUNE/CLOCK] or
[+, TUNE/CLOCK]. OR Press the desired memory button ([M1] to [M5]).

4-C Stopping the Alarm
When the alarm sounds at the set time, � � � and/or � � flashes. [SNOOZE/MUTE] � is displayed and

4 Adjust the volume by using the VOLUME control. 5 Press and hold [RADIO, ALARM
DISPLAY/SET] (the button on the top of the unit) until the time flashes.

6 Set the alarm time by pressing
[�, TUNE/CLOCK] or [+, TUNE/CLOCK]. � Pressing and holding [�] or [+] changes the time faster. [OFF]

[RADIO, ALARM ON/OFF] [BUZZER, ALARM ON/OFF]

7 Press and release [RADIO, ALARM DISPLAY/SET] to save the
radio alarm time and the station. � The time stops flashing and returns to the current time. �� � is displayed while the radio alarm is turned on.

To stop the alarm temporarily (SNOOZE)
Press [SNOOZE/MUTE]. �The alarm will then start again in 6 minutes. You can press [SNOOZE/MUTE] again to stop the alarm.

8 Press [OFF] to turn the radio off.
� The radio will automatically turn on at the set time and will turn off after 1 hour. �You can exit alarm setting mode any time by pressing [OFF]. �The buzzer will sound at the set radio alarm time if you did not turn the radio on in step 1. �To change only the radio alarm time, repeat steps 5 to 7. �If a power failure occurs, the radio alarm time and station preset will be retained for about 10 minutes. To confirm the radio alarm time and station: Press and release [RADIO, ALARM DISPLAY/SET]. �The alarm time and the station will be displayed for about 3 seconds.

To stop the alarm for the day
Press [OFF]. �The setting remains and the alarm will sound daily until you stop the alarm completely. � � and/or � � will remain on the display.

To stop the alarm completely
1. While the alarm is sounding or the SNOOZE mode is on, press [OFF], then follow step 2. OR If the alarm is not sounding or the SNOOZE mode is not used, go to step 2. 2. Press [RADIO, ALARM ON/OFF] or [BUZZER, ALARM ON/OFF] to turn the alarm off. �� � or � � disappears from the display.

�To turn the alarm on again, press [RADIO, ALARM ON/OFF] or [BUZZER, ALARM ON/OFF].

For assistance, please call: 1-800-211-PANA(7262)