10.3.4. How to Install the Shield Case
Note: � If you don�t have special tools (ex. Hot air disordering tool), conduct the following operations. � Shield case�s No. : PNMC1002Z 1. Put the shield case.
2. Solder the surroundings.
10.3.5. How to Remove the IC
1. Heat the IC with a hot air desoldering tool through the P.C.Board.
2. Pick up the IC with tweezers, etc. when the solder is melted completely. Note: � Be careful not to touch the peripheral parts with tweezers, etc. They are unstable.
When it is hard to melt the solder completely, heat it with a hot air desoldering tool through the IC besides through the P.C.Board.
3. After removing the IC, clean the P.C.Board of residual solder. 66
