PANASONIC KXTG5779
Manual de Usuario

Multi-unit Operation Auto intercom/Room monitor
This feature allows you to: � answer an intercom call without pressing any buttons on the handset. � listen to the sound in a room where the handset is located. Turning auto intercom on/off �Off� (Default): Turns this feature off. �On(Ringer On)�: When an intercom call is received, the handset rings 2 times then the speakerphone is automatically turned on. �On(Ringer Off)�: When an intercom call is received, the handset does not ring and the speakerphone is automatically turned on. This allows you to easily monitor a baby�s room, for example, from different areas of the house. Handset L To switch to the receiver, press {C}.

2

To end the intercom, press {OFF}.

Note: L Auto intercom cannot be used when: � all handsets are being paged by the base unit. � your handset is receiving a transferred outside call. Monitoring audio in a room With a handset or the base unit, you can listen to the sound in a room where another handset is located. Important: L Before using this feature, set auto intercom of the destination handset to �On(Ringer Off)� to allow access by other handsets. Handset

1 2 3

{MENU} (middle soft key) i {#}{2}{7}{3} Select the desired setting. {SAVE} i {OFF}

1 2 3 1 2 3

Call the destination handset (page 63). L You can listen to the audio. To mute your sound output, press {MUTE} if necessary. Press {OFF} to stop monitoring.

Note: L This feature cannot be used when the base unit is paging all handsets, or when receiving a transferred call. Answering an intercom call using auto intercom Handset

Base unit Call the destination handset (page 63). L You can listen to the audio. To mute your sound output, press {MUTE} if necessary. Press {INTERCOM} to stop monitoring.

1
64

When you are paged by the base unit or another handset, speak into the microphone.

For assistance, please visit http://www.panasonic.com/help