|
|
|
Usuarios conectados
Actualmente hay 5920 visitantes online. |
|
Productos
|
|
Información
|
|
Destacado
|
|
|
 |
|
|
No hay comentarios de productos.
To dial after confirming the entered number
To redial the last number dialed
Press (TALK) and press (REDIAL).
1
Enter a phone number.
To redial using the redial list
1112222
� If you misdial, press (CLEAR). Digits are erased from the right. � To cancel, press (EXIT).
The last 10 phone numbers dialed with the handset are stored in the redial list. 1. Press (REDIAL).
� The last number dialed is displayed. 2. Press (REDIAL) until the desired
2
Press (TALK).
� You can press a line button instead of pressing (TALK). � The line number is displayed. � After a few seconds, the display will show the length of the call.
number is displayed.
� You can scroll between numbers by pressing or . � To exit the list, press (EXIT). 3. Press (TALK). � To erase an item, repeat steps 1 and 2, and press (CLEAR). � If �No items stored� is displayed, the list is empty.
3
To hang up, press (TALK) or place the handset on the charger.
To adjust the receiver volume (High, Medium or Low)
Press
or
To put a call on hold
Press (HOLD).
� �Hold� and the line number are displayed. � The line status icon flashes on the display. � If a call is kept holding for 3 minutes, a warning tone will sound. After 2 additional minutes on hold the automated attendant will respond to the caller and he/she can call the base unit or another handset or leave a message following the Incomplete Call Handling Menu (p. 63).
while talking.
, the
Chapter 2 Basic Operation
� Each time you press or volume level will change. Ex. High Loud
Low � � � � � � � High
Lighted handset keypad
The handset dialing buttons will light when you press a button, and flash when a call is received. The lights will go out about 10 seconds after pressing a button, lifting the handset off the charger or answering a call.
To release the hold
Press the line button.
� The base unit and other handset users can release the hold by pressing the line button. If another phone is connected on the same line, the hold will also be released by lifting its handset.
29
|
|
|
> |
|
