Making Calls
To dial after confirming the entered number 1 Enter a phone number. To redial using the redial list (Memory Redial)
The last 5 phone numbers dialed are stored in the redial list.
3334444|
KClear
PauseL
1 Press [REDIAL].
K Erase dB
� If you misdial, press Clear. Enter the correct number. � If a pause is required when dialing, press Pause where needed (p. 36). � To cancel, press [OFF].
333-4444
� The last number dialed is displayed.
2 Press [C] or [s]. 3 To hang up, press [OFF] or
unit.
2 Scroll to the desired number by
pressing [d] or [B].
� You can also scroll down through the list by pressing [REDIAL]. � To exit the list, press [OFF].
place the handset on the base
3 Press [C] or [s]. To adjust the receiver/ speaker volume during a conversation
There are 3 volume levels for the receiver and 6 volume levels for the speaker. � To erase an item, scroll to the item then press Erase. � If �No items stored� is displayed, the list is empty.
To put a call on hold
Press [HOLD] during a conversation.
Hold Rcvd calls K Phone book L
To increase volume, press [B]. To decrease volume, press [d].
Ex. Receiver volume: High Speaker volume: Level 6 Volume Low High K(VE) MuteL � The display shows the current volume setting. � If you try to increase/decrease volume when it is at the maximum/ minimum level, the handset will beep 3 times.
To return to the call, press [C] or [s].
� If another phone is connected on the same line (p. 8), you can also take the call by lifting its handset. � If a call is kept on hold for 6 minutes, an alarm tone will start to sound. After 4 additional minutes on hold, the call will be disconnected.
To redial the last number dialed
Press [C] or [s], then press [REDIAL].
