|
No hay comentarios de productos.
Preparing the Answering System Number of Rings
>
Handset You can select the number of times the unit rings before the Answering System answers a call, from �2� to �7� or �Toll saver�*. The factory preset is �4�.
1 Follow steps 1 to 3 of �Caller�s Recording
Time� on page 20.
2 Press Select at �Number of rings�. 3 Select the number of rings by pressing [ ] or > >
[ ].
� You can also select the number of rings by pressing [0] (Toll saver*), or [2] to [7].
Number of Select rings Back
Number of rings :4 Back Save
4 Press Save, then press [OFF].
*Toll saver
When you call the unit from a remote operation, the number of rings will tell you if there are any new messages. If the unit answers on the 2nd ring, there is at least one new message. If the unit answers on the 4th ring, there are no new messages. To save the toll charges for the call, hang up immediately when you hear the 3rd ring. The 3rd ring indicates that there are no new messages.
Recording Mode
Handset
You can select the recording mode, �Enhanced recording (8min)� or �Standard recording (17min)�. If you require clearer sound to listen to the messages, select �Enhanced recording (8min)�. If you select this mode, the total recording time is 8 minutes. If you require longer recording time, select �Standard recording (17min)� (the factory preset).
> >
> > > Preparation
1 Follow steps 1 to 3 of �Caller�s Recording
Time� on page 20.
2 Scroll to �Recording mode� by pressing [ ]
or [ ], then press Select.
Recording Select mode Back
Standard recording(17min) Back Save
3 Select the recording mode by pressing [ ] or 4 Press Save, then press [OFF]. >
[ ].
For assistance, please call: 1-800-211-PANA(7262)
21
|
