1. FORMER SUPPLEMENT
1.1. Sup No. 2 or Sup No. 3 (KMF0103276S1)
Note: Supplement No. 1~2 have already supplied with printed matter. Please refer to that.
2. REPLACEMENT PARTS LISTS
2.1. REFERENCE CHART
Reason for Change *The following items (1-8) indicate the reason for change. See the �Notes� column for each part in ORIGINAL AND NEW PARTS COMPARISON LISTS . 1. Improve performance Remarks: 2. Change of material or *a: To share the part with other models. dimension 3. To meet approved specification 4. Standardization 5. Addition 6. Deletion 7. Correction 8. Other
Interchangeability Code **The following items (V-Z) indicate the interchangeability. See the �Notes� column for each part in ORIGINAL AND NEW PARTS COMPARISON LISTS . Parts Set Production V Original New Early (before change) Late (after change) Early (before change) Late (after change) Early (before change) Late (after change) Early (before change) Late (after change) Original or new parts may be used in early or late production set. Use original parts until exhausted, then stock new parts.
Original W New
Original parts may be used in early production sets only. New parts may be used in early or late production sets. Use original parts possible, then stock new parts. New parts only may be used in early or late production sets. Stock new parts.
Original X New
Y
Original New
Original parts may be used in early production sets only. New parts may be used in late production sets only. Stock both original and parts.
