|
|
|
Usuarios conectados
Actualmente hay 5840 visitantes online. |
|
Productos
|
|
Información
|
|
Destacado
|
|
|
 |
|
|
No hay comentarios de productos.
Notes � If you connect a monaural VCR, connect the yellow plug to (the yellow jack) and the black plug to -L (MONO) (the white jack). � If you connect a VCR to the � (antenna) terminal, preset the signal output from the VCR to the program number 0 on the TV. � If both (S video input) and � 1 (video input) at the rear of your TV are input at the same time, the (S video input) is automatically selected. To view � 1 (video input), disconnect the S video cable. � Do not connect video equipment to � 3 (video input) at the front and the rear of your TV at the same time; otherwise the picture will not be displayed properly on the screen. � When no signal is input to the connected video equipment, the TV screen becomes blue.
Connecting the 3D WOOFER
You can enjoy high quality sound by connecting the 3D WOOFER.
1
Bottom of 3D WOOFER
Using Your New TV
Rear of TV
Step 2
Insert the batteries into the remote
Note � Do not use old batteries nor use different types of batteries together.
2
3
Black wire
Step 3
Preset the channels automatically
Front of TV
� 9 �
Red wire
1 2
PROGR
ONE-PUSH AUTOMATIC PROGRAMMING
Place the foot at the front of the 3D WOOFER into the footholds on the top of your TV. Fit the ribs at the rear of the 3D WOOFER into the provided slots at the rear of your TV. Connect the wires to the 3D WOOFER (8�) terminals at the rear of your TV. The red wire should be connected to the � red terminal and the black wire to the � black terminal.
AUTO PROGR
3
ONE-PUSH AUTOMATIC PROGRAMMING
Tip � If you want to stop the automatic channel presetting, press MENU twice. Note � If your TV has preset an unwanted channel or cannot preset a particular channel, then preset your TV manually (see page 29).
Now You Are Ready. . . To watch your TV, see page 9.
Notes � Connect only the supplied 3D WOOFER; otherwise your TV may malfunction. � Unplug your TV from the wall outlet when connecting the 3D WOOFER. � To prevent a malfunction caused by a short circuit of the terminals, make sure that none of the 3D WOOFER wire strands stick out, making contact with it�s neighbouring 3D WOOFER terminal.
Using Your New TV
5
6
Using Your New TV
KV-XF34M97
RM-953
|
|
|
> |
|
