|
|
|
Usuarios conectados
Actualmente hay 5968 visitantes online. |
|
Productos
|
|
Información
|
|
Destacado
|
|
|
 |
|
|
No hay comentarios de productos.
The operating instructions mentioned here are partial abstracts from the Operating Instruction Manual. The page numbers of the Operating Instruction Manual remain as in the manual.
SECTION 1 GENERAL
Using Your New TV
Getting Started
Step 1
Connect the antenna
If you wish to connect a VCR, see the �Connecting a VCR� diagram below.
Notes � If you connect a monaural VCR, connect the yellow plug to VIDEO (the yellow jack) and the black plug to AUDIO-L (MONO) (the white jack). � If you connect a VCR to the � (antenna) terminal, preset the signal output from the VCR to the program position 0 on the TV. � Do not simultaneously connect video equipment to the VIDEO 3 INPUT jacks at the front and the VIDEO IN 3 jacks at the rear of your TV. � If both S1 VIDEO and VIDEO of VIDEO IN 1 are input simultaneously, the S1 VIDEO is automatically selected. To view the video input to VIDEO IN 1, disconnect the S video cable. � When no signal is input to the connected VCR (or video equipment), the screen becomes blue.
Using Your New TV
Antenna connector (not supplied) or Antenna cable (supplied)
Step 2
Insert the batteries into the remote
� 4 �
Connecting a VCR
To antenna output VCR
VIDEO IN VIDEO OUT
Antenna cable (not supplied)
Note � Do not use old batteries nor use different types of batteries together.
: Signal flow
Step 3
Preset the channels
Notes � When you use the TV for the first time, preset the channels by pressing AUTO PROGR button inside the front cover.
Antenna cable (not supplied)
Antenna cable (supplied)
� PRESET menu beforesystem, select �CABLE : ON��Changing If you use a cable TV presetting the channels. (See of the other PRESET menu options� on page 30.)
1
MAIN POWER
MAIN POWER
VIDEO 3 INPUT
To � (antenna)
AUDIO VIDEO
VIDEO IN
MON/TV OUT
VIDEO
S1 VIDEO
VIDEO
(MONO)
AUDIO
ONE-PUSH AUTOMATIC PROGRAMING
S video cable (not supplied) To S video output
S1 VIDEO
L(MONO) AUDIO R
2
AUTO PROGR
1
1
To video and audio outputs
To S1 VIDEO
To VIDEO IN 1, 2, or 3 VIDEO (yellow) AUDIO-L (MONO)(white) AUDIO-R (red) : Signal flow
AUTO PROGRAM
Audio/Video cable (not supplied)
Now You Are Ready. . .
The channels are now automatically preset in your TV. To preset the channels manually, see �Adding or erasing channels� on page 28.
Using Your New TV
4
Using Your New TV
5
|
|
|
> |
|
