SONY KVEF29M61
Manual de Servicio

KV-EF29M61

RM-881

The operating instructions mentioned here are partial abstracts from the Operating Instruction Manual. The page numbers of the Operating Instruction Manual remain as in the manual.

SECTION 1 GENERAL

Using Your New TV

Getting Started
Step 1
Connect the antenna
If you wish to connect a VCR, see the �Connecting a VCR� diagram below.
Notes � If you connect a monaural VCR, connect the yellow plug to (the yellow jack) and the black plug to -L (MONO) (the white jack). � If you connect a VCR to the � (antenna) terminal, preset the signal output from the VCR to the program position 0 on the TV. � Do not simultaneously connect video equipment to the � 3 (video input) jacks at the front and the � 3 (video input) jacks at the rear of your TV. � If both (S video input) and � 1 (video input) are input simultaneously, the (S video input) is automatically selected. To view the video input to � 1 (video input), disconnect the S video cable. � When no signal is input to the connected VCR (or video equipment), the screen becomes blue.
or Antenna cable (not supplied) IEC connector (not supplied)

Using Your New TV

Step 2
Insert the batteries into the remote
Note � Do not use old batteries nor use different types of batteries together.

� 4 �
Antenna cable (not supplied) : Signal flow

Step 3
Preset the channels

Connecting a VCR

1

Antenna cable (not supplied) To antenna output VCR To � (antenna)
ONE-PUSH AUTOMATIC PROGRAMING

2
AUDIO VIDEO

AUTO PROGRAM PR : 0 1 T V SYS : B / G VHF L O W

1
1 4 7 2 5 8 3 6 9

S video cable (not supplied)
AUTO PROGR

VIDEO IN VIDEO OUT

To video and audio outputs

To S video output

To (S video input)

To � 1, 2, or 3 (video input) (yellow) -L (MONO) (white) -R (red) : Signal flow

Now You Are Ready. . .
The channels are now automatically preset in your TV. To preset the channels manually, see page 34.

Audio/Video cable (not supplied)

4

Using Your New TV

Using Your New TV

5