JVC KVC10
Manual de Servicio

KV-C10

Disassembly method
Removing the metal cover (See Fig.1)
1. Remove the four screws A attaching the metal cover on the back of the body. 2. Remove the four screws B attaching the metal cover on both sides of the body. 3. Remove the metal cover from the body by lifting the rear part of the cover.
Metal cover

A

B

Fig.1

C

Removing the main board (See Fig.2 to 3)
Prior to performing the following procedure, remove the metal cover. 1. Remove the four screws C attaching the pin jack and the main board. 2. Remove the four screws D attaching the main board.

Fig.2

Front panel

D

Main board

D

Fig.3

1-3