|
No hay comentarios de productos.
Using the Menus
Using the Timer
Menu
Video Audio Channel Parent Timer Setup Basic
To access the Timer menu, refer to the following steps:
To Display
To Highlight
To Select
Timer 1 : Set Timer 2 : Set Current Time Program
Program the time
: Select: End:
AM
Press joystick f to highlight an option then press Current Time
.
Move:
Set your TV to the current day and time. 1 Use the joystick to scroll up or down to enter the correct day and time, then press 2 Press . to exit the menu. to return Timer menu or press
�
You must set the Current Time before you can use Timer 1 or Timer 2.
Timer 1 and Timer 2 Scheduled viewing
Use the timers to program your TV to turn on and off by day, time, duration and channel. The timers duration is maximum of 6 hours. When the channel is fixed, it is not necessary to set the channel. Press to program Timer 1 or Timer 2. 1 2 Use the joystick to highlight to select Timer 1 or Timer 2, then press . Use the joystick to enter the desired day, start time, duration, and channel, then press . The timer status should be On when the Timer has been set, and the Timer light on the front panel of the TV should be turned on. Press to exit the menu.
3
� �
Select Off to turn off the Timer (your previous settings will be saved). When you perform Auto Program, Timer 1 and Timer 2 settings will be cleared. Also, in the event of any loss of power, Current Time, Timer 1 and Timer 2 settings will be cleared.
45
|
