SONY KV29VL65A
Manual de Servicio

KV-27S40 / 27S45 / 27S65 / 29SL40 / 29SL40A / 29SL40C/ 29SL45 / 29SL65 / 29SL65C/ 29XL40M / 29XL40P / 29XT11A

Using your New TV (continued)
Watching two programs at one time - PIP
The Picture-in-Picture (PIP) feature allows you to view two channels simultaneously, one in the full size �main� picture and one in a smaller �window� picture. This means that two separate tuners must be available to provide the two signals. Certain models (KV-27S45, 27V45 only) are equipped with a single tuner. This simply means that a VCR must be connected and turned on for PIP to operate. Tip z
To ensure a correct single tuner PIP connection (KV-27S45, 27V45 only), make sure the following list is complete before using PIP:
The sound of the main picture is received. Main picture Input-source mode or TV channel for the main picture Input-source mode or TV channel for the window picture Window picture

REFER TO THE ILLUSTRATION OF THE REMOTE CONTROL ON THE INSIDE FRONT COVER OF THIS MANUAL AS YOU REVIEW THIS CHART

Use the Yellow Labeled Buttons for PIP Operations.
PIP

Press once to display the window picture (1/9 size). Press again to reduce the size of the window picture (1/16 size). Press a third time to remove the window picture. Press repeatedly to step through available video inputs: TV, VIDEO 1, VIDEO 2, and VIDEO 3 (KV-27S45, 27S65, 27V45, 27V65 only)

� A cable or antenna is connected to the VCR � The VCR is connected to your TV � The VCR is turned on
(for detailed connection information, see pages 5-7)

TV/VIDEO

If you have a single tuner, your PIP input source is the VCR.
AUDIO

Press to alternate sound between the main picture and the window picture. A will appear for a few seconds to indicate which picture is receiving sound.

Note � You must press TV (FUNCTION) before you can control PIP with the yellow labeled buttons. 16

Use the Yellow Labeled Buttons for PIP Operations.
TV/VTR + CH �

Press to change the TV channel in the window picture. (KV-27S65, 27V65 only) For models KV-27S45, 27V45, you must press VTR/DVD (FUNCTION), then use the main CH +/- buttons to change channels. (see right)

Changing channels with a single tuner PIP
� KV-27S45, 27V45 only

1 Press TV/VIDEO until you reach the TV
input.

2 Press PIP (the window picture appears).
Press to move the location of the window picture (counterclockwise) around the main picture. Press to freeze the window picture. Great for copying down phone numbers, addresses, recipes, etc. Press FREEZE again to restore the previous screen(s). To change the window picture: 1 Press VTR/DVD (FUNCTION).

POSITION

2 Press the main CH +/� buttons to change
FREEZE

channels. To change the main picture: 1 Press TV (FUNCTION).

SWAP

Press to switch the audio and video of the main picture and the window picture. Each time you press SWAP, the picture and sound of the two will be swapped. Any channels being received through the AUX jack cannot be displayed as a window picture. (KV-27S65, 27V65 only)

2 Press the main CH +/� buttons to change
channels. Note � If you have the same program in both the window and the main picture and cannot change the channel in the window; press TV/VIDEO until you reach the TV input in the main picture.

17

� 14 �