SONY KV27FA310
Manual de Servicio

Programming the Remote Control
If you have video equipment other than Sony brand (or if you have a Sony DVD/VCR combination unit) that you want to control with the TV�s remote control, use the following procedure to program the remote control.

Remote Control

1 2

Check the list of �Manufacturer�s Codes� on page 6 and find the three-digit code number for the manufacturer of your component. If more than one code number is listed, use the number listed first. Press
The

.
and FUNCTION button will flash when you press .

�
3

Press or FUNCTION button to indicate the type of component you want to program with the remote control.
You must do step 4 within 10 seconds of step 3, or you must redo steps 2 and 3.

�
4 5 6

Use the Press

0

9

buttons to enter the three-digit manufacturer�s code number.

.

To check if the code number works, aim the TV�s remote control at the component and press on the green POWER button (VCR/DVD, SAT/CABLE, TV) that corresponds with that component. If it responds, you are done. If not try using another code listed for that manufacturer.
If you have problems programming your remote control, see �Troubleshooting� on page 42.

�

5