KS-FX473R/KS-FX470R
Pinch-roller (R) assembly S support plate C washer A arm spring (b) Shaft Pinch-roller (F) assembly
D
A arm spring (a) Shaft
FF roller
Playback head
Remove the P arm spring (r) from the chassis.
Remove the P arm spring (f) from the chassis.
P arm spring (r)
P arm spring (f)
Fig.2
Removing the playback head (See Fig.2)
Prior to performing the following procedure, remove the direction switch board and the FF / REW lever assembly. 1. Remove the screw D attaching the playback head. 2. Remove the C washer and pull out the FF roller. 3. Remove the S support plate, the A arm spring (a) and (b), the playback head. ATTENTION: The A arm spring (a) differs from the A arm spring (b).
Removing the pinch-roller (R) and (F) assembly (See Fig.2)
Prior to performing the following procedure, remove the direction switch board and the FF / REW lever assembly. 1. Remove the P arm spring (f) in the pinch-roller (F) assembly from the chassis. 2. Remove the P arm spring (r) in the pinch-roller (R) assembly from the chassis. 3. Draw out the pinch roller (F) and (R) assembly from the shaft. ATTENTION: The P arm spring (f) differs from the P arm spring (r). ATTENTION: The pinch roller (F) assembly differs from the pinch roller (R) assembly.
