|
No hay comentarios de productos.
KS-FX460R/KS-FX463R
Removing the main board (See Fig.7 and 8)
Prior to performing the following procedure, remove the front panel assembly, the front chassis assembly, the heat sink and the bottom cover. 1. Remove the screw B, the two screws C and the two screws D attaching the rear bracket on the back of the body. Remove the rear bracket. 2. Remove the two screws E attaching the main board on the bottom of the body. Disconnect connector CN901 and CN902 on the main board in the direction of the arrow.
B
C
D
D
Rear bracket
C
Fig.7
CN902
Main board
E
E
CN901
Fig.8
Removing the cassette mechanism section (See Fig.9)
Prior to performing the following procedure, remove the front panel assembly, the front chassis assembly, the heat sink, the bottom cover and the main board. 1. Remove the four screws F attaching the cassette mechanism section on the back of the top chassis.
Cassette mechanism section
F
F
Top chassis
F
Fig.9
F
1-5
|
